Quickie Work Bench : A table from six scraps

Last year I pulled these six scrap boards from of a dumpster behind an old Ingles. They're pretty badly cupped but otherwise solid, hard yellow pine 2x12s.

 

It's amazing what people get rid of during a tear-out.

I squared up the boards and made some rips.

All of the wood for this project is stacked on the left. The only scraps are on the right.

You may have noticed that for way too long I have worked without a bench. Cuts were made out on the deck and most pieces were assembled on the floor.

So this is long overdue. 

 It's a simple design from scrap lumber and it went together quickly. If every project could be like this...

 I won't be making any more cuts out here.

This helper really digs it.

 He also helped me install additional bracing from the leftover cutoffs.

Little known fact about furniture biology: tables asexually reproduce more tables. It's a fascinating life cycle.
] j [

Mystery hardwood revealed: it's an end table!

Don't be confused; it's not the world's smallest end table. It is the most engaging of the 96 little tiles I sliced from an old timber.

I kept that timber for a reason, but for a long time it was unremarkable, waiting for the right moment to speak to me.

While organizing the workshop, I saw some mold on one end and went outside to cut it away. That's when the timber spake, "Behold, my intoxicating fresh end grain and sawdust like a terra cotta murder scene."

 I decided to slice it into tiles. Wanting to preserve the distinct rough-sawn marks on either side, I ripped them off first.

I liked the little slats, so I sliced the timber into three sections to cut two more at the same width.

  Any subtle change in the light or the surface reflects in the coloration and natural luster.

(first layout attempt)

 (from Reboot)

 This end-grain wood floor was the original inspiration.

 I'll be going with the layout below:

(six tiles shy)

I can now see an end table coming together. The tiles will be wrapped in rails, those four slats ripped from the same timber. From the house where I found the timber I also salvaged some old tongue and groove flooring painted a pale aqua and various weathered boards. The T&G will serve as a base for the tiles and from one weathered board I'll create legs.

With excess irregular tiles, I can also form bookmatched coasters.

It really doesn't smell like Cedar. It's rich and earthy and behaves more like Walnut, besides the purplish cast and clay colored sawdust. The man who built and lived in that house milled the wood from his own land; I can't imagine it's not indigenous. Despite looking different in every photo, the tone is consistent throughout so it can't be stained. I'm still not sure what kind of wood it is, but I am sure I love it!